Heavy Duty Floor/Surface Cleaner 3 x 5Litres - Enzyme Wizard

Information

Industrial strength heavy duty cleaner for all surfaces. Contains no solvents.

• Contains a proprietary multi-enzyme formula designed to break down grease, oils and petroleum based problems. Rather than merely pushing the oil and grease around with soap, the multi-enzyme formula lifts and breaks down the petroleum and grease.
• pH Neutral – Soap Free Formula – Septic safe
• No Palm Oil – No Ammonia – No Chlorine
• Designed to be effective at low temperatures!
• No Heavy scrubbing needed – works well with scrubbers
• Designed to discharge down the drain where the enzyme formula will continue to attack the grease and oil residue.
• Non-corrosive and safe for all surfaces not harmed by water.
• For use on – Concrete floors, Car Parks, Outdoor Paving, Factory Floors, train platforms.

What’s innovative about the ‘Heavy Duty Cleaner’?

Multi Function Enzyme technology
The Benefits of Adding a Multi-Enzyme Solution:

• A more sustainable cleaner. Enzymes are readily biodegradable.
• Support for the “compaction” trend. Low volumes of enzymes are required to replace high-volume ingredients such as surfactants and builders.
• Improved performance. The synergistic effect of combining several enzymes results in improved stain removal and overall general cleaning beyond what single enzymes and traditional surfactants can achieve.
• Energy-efficient product. Enzymes work well even at low temperatures, allowing wash temperature reductions and thereby energy savings.
• Enzyme cleaners are naturally occurring elements so they are “Planet-Safe.”

How to Use General Cleaning :

1. Dilute the product at a ratio of 10:1 into mop bucket
2. Wet mop head as you normally would.
3. When squeezing out mop head, leave mop head wet.
4. Mop floor as you usually would, leaving a thin layer of solution - this will allow the enzymes to work at their best.
5. Use product over a number of days until excess dirt and grime has been broken down and then continue with Enzyme Wizard No Rinse floor cleaner.

How to Use Heavy Duty cleaning :

1. Dilute the product at a ratio of 50:1 and then add to the tank of the scrubber (ride on or walk behind scrubber.
2. Use a soft pad when using a scrubber as it will allow the bristles together with the enzymes to scrub the concrete floor.
3. Go over the area a couple of times until marks on concrete have been removed.
4. When finished dirty water can be disposed of down the drain.

Machinery / Equipment

• Always start at lowest dilution rate and gradually increase.
• Use a soft pad as this helps the enzymes to activate quicker.
• The enzymes will keep machinery insides clear of soap build-up.
• Waste water can be flushed down drain.

Areas

• Industrial floors
• Kitchen floors
• Concrete Pads
• Service bays
• Carparks
• Bus Stations
• Train Platforms

Important Information:

• The product has been designed to remove petroleum oils and car grease from concrete surfaces.
• Not to be used on aluminium surfaces.
• When cleaning a concrete surface please be aware that the surface is uneven and that some areas will need extra attention if they are below the scrubbing action of the pad.
• Can also be used on concrete floors that have been painted.
• Can be used on all types of floor surfaces.
• Can be disposed of down drains, enzyme will carry on breaking down organic matter in drains.